Vision prototype photo

Vision prototype photo
This is the Vision prototype designed/built by Steve Rahm in USA.

Friday, August 18, 2017

First engine fitting.

Engine mounted for the first time.  Will test all attachment cables and firewall pass through items for connection to engine.

Monday, August 7, 2017

Wing Root fairings - upper

Began to build wing root fairings for the upper portion of wing.  I was looking for a way to do this that would not take to much time and effort as it would if foam were to be carved for shaping this section.  I used small 4 inch sections of double poster board to form the shape.  This worked well but I will have some filling to do on the upper surface due to stepping of each posterboard section onto the next.
Upper surfaces glassed with two layers of cloth.





Wednesday, August 2, 2017

Fuel lines at Wing Root.

Fabricated two fuel lines from wing tanks to fuselage where they connect to the fuel valve, filter and fuel flow sensor.