Vision prototype photo

Vision prototype photo
This is the Vision prototype designed/built by Steve Rahm in USA.

Monday, August 7, 2017

Wing Root fairings - upper

Began to build wing root fairings for the upper portion of wing.  I was looking for a way to do this that would not take to much time and effort as it would if foam were to be carved for shaping this section.  I used small 4 inch sections of double poster board to form the shape.  This worked well but I will have some filling to do on the upper surface due to stepping of each posterboard section onto the next.
Upper surfaces glassed with two layers of cloth.





No comments:

Post a Comment